lister cs manual pdf

[mobile_bob]

here is a link for a pdf of a lister cs
the guy managed to scan it and clean it up
then repost it as a pdf

http://stashbox.org/v/333292/Lister%20CS%20Plates.pdf

thought it might be useful to someone here

bob g

[dubbleUJay]

Hi mobile_bob, I'm the guy that did the PDF.

I've got a couple more drawings or "Recycled Manuals" to post and I'll upload them and the platesPDF again once admin has made suggestions as to a common place were we can upload such files like PDF,TXT exec. I'm just afraid that in a years time we will sit with broken links as these "uploading sites" tend to disappear after a while.

I did ask the question here:
http://www.microcogen.info/index.php?topic=46.0

Maybe someone else can comment on where to get a common place to upload our white papers and such?

dubbleUJay

[mobile_bob]

my appologies for poaching your work!

i shoulda known this place would have attracted the guy responsible for the pdf

good work btw

bob g

[rcavictim]

That site only appears to allow uploads.  I could not view the file or download it.  What am I doing wrong?

[dubbleUJay]

my appologies for poaching your work!

i shoulda known this place would have attracted the guy responsible for the pdf

good work btw

bob g

No Sir, its not poaching, I don't mind at all!
I was just hoping someone can tell us how to reliably upload this sort of stuff so that we wont have problems like rcavictim is having!

rcavictim, right-click on the link in mobile_bob's post and "Save File as..." or something similar if your using another browser than me.

dubbleUJay

[Tom T]

Glad to know it was not just me it did now work for. Could we put these files in a temp file that woud stay up for a week and then go away to free up space for another one? Tom T

[veggie]

There is Lister info and a manual available here....

http://www.volvoxengineering.com/downloads.htm

Veggie

[Jedon]

I had to sign up and log in before I could download.

[dubbleUJay]

Guys, the PDF is 820kb, to big to upload directly to our White-papers area which only allows 500kb. If I make it any smaller, it will loose to much clarity.
I try and get special permission by admin as stated by him and upload it.
As far as I know, one do not have to register to DL it, but maybe they try and trick one into doing so by not making it obvious.
There is also copies of each page in my Lister Engine Gallery, but they are JPG's and all separate pictures, not one file and a slept to DL: 
http://listerenginegallery.com/main.php?g2_itemId=2541

[Tom T]

Can you e mail it direct?  Tom T

[admin]

i bumped up the size limit to accomodate the file
let me know when you have it uploaded to the forum "white pages"
so i can decrease the file limit again to 500k

admin

[JohnF]

Check my website at www.woodnstuff.ca, under "articles" then "Lister booklet". click on that and you should be able to see an original production for the 5/1 up to the 10/2.

[dubbleUJay]

Admin, I upload it now, sorry for the delay, was nighttime over-here

dubbleUJay

[dubbleUJay]

a short time later ........

Got the following error although it says that the max. size is now 1024kb!

Please advise.

[admin]

please give it another try
i thought you were done, and reset the limit
to 500k

i turned it back up to 1024k
and will leave it there till tomorrow

sorry for the inconvenience

admin