ST Mods and sources for American rectifier?

[playdiesel]

 I keep reading that I should change some things on my new ST heads 5 and 15KW before I run them. The junction box is understandable ( I am electricaly challanged , not mechanicaly) I have test run my 15 and I see that it will be shaken to bits in short order. I also see that I should shange the rectifier to an American style but I see no specs or sources listed. Would one of you guys care to enlighten me with some specs and/or sources? Part number would be great.

thanks in advance

[Shipo]

this is what they refers as a American Style....

http://cgi.ebay.com/50A-1000V-Metal-Case-Bridge-Rectifier-SEP-KBPC5010-UL-/260530667360?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3ca8d67f60

Good Luck...

[playdiesel]

And I assume that particular model is the correct amps, volts, ohms, hurts, bla bla bla for my ST heads? Told ya, I am a electricilliterate

[Shipo]

I would use KBPC3510 for the ST-5 and for the ST-15 KBPC7010...

[playdiesel]

I owe ya one, thanks

[WGB]

this is what they refers as a American Style....

http://cgi.ebay.com/50A-1000V-Metal-Case-Bridge-Rectifier-SEP-KBPC5010-UL-/260530667360?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3ca8d67f60

Good Luck...

My decision was made for me!
The Chinese rectifier smoked the first time I turned her over!

[Tom Reed]

Welcome to the club, mine fried the first time a good load was applied. The quality replacement has worked well for about 1000 hours now.