News:

we are back up and running again!

Main Menu

$300.00 worth of entertainment :o

Started by XYZER, March 28, 2010, 09:02:14 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 3
User actions

XYZER

#30
March 23, 2012, 07:48:15 AM
Bob,
Thanks I can work with that!
Dave
Vidhata 6/1, Power Solutions 6/1, Kubota Z482

Thob

#31
March 23, 2012, 09:05:56 AM
Bob,

Nice supplier!  I've added them to my list of online shops.
Witte 98RC Gas burner - Kubota D600 w/ST7.5KW head.
I'm not afraid to take anything apart.
I am sometimes afraid I'm not going to get it back together.

XYZER

#32
March 23, 2012, 04:56:46 PM Last Edit: March 23, 2012, 05:27:35 PM by XYZER
My Kubota EA500-NB has a slight oil leak from between the crank bearing plate and maybe the seal cover. It is not the outer seal ...darn! Is there a procedure to remove the main bearing support cover and replace the o-ring under it? I can remove the clip holding the bearing on the crank but the outer clip is captive inside the housing. I didn't want to have to go deep into things and it's looking like one may have to. Any been there done that guys out there?
Dave


Vidhata 6/1, Power Solutions 6/1, Kubota Z482
Print
Go Up Pages 1 2 3
User actions