Source for PMG's? Seem to be all gone...

[RJ]

Yes I have the engine too. It's still mounted to it. Did you ever confirm the voltage output of these units?

I have a lead on a cheap Schneider 6.8 kva 48v inverter.

[Henry W]

They are 48 volt.
I would think the Saul would handle at least 8Kw. I'll send you a phone number of someone that should be able to assist you.

[Henry W]

https://www.shawneepower.com

Telephone
913.631.2442 or
888.660.2442

I believe his name is Eric.

[Henry W]

He is a member here.

User name: SPSInc

[Henry W]

The engine that powered the Daul unit was a Ford LRG-425 industrial engine.

It has a continuous rating of 72 hp with LP (propane)

Here are the specs:

Gasoline (corrected per SAE J1995)

Fuel Specification.

.87 A.K.I.

Rated Power @ 3600 RPM ....

.Intermittent: 74 HP (55 kW)

Continuous: 63 HP (47 kW)

Peak Torque @ 1800 RPM.

.Intermittent: 123 Ft. Lbs. (167 Nm)

Continuous: 104 Ft. Lbs. (141 Nm)

Power @ 1800 RPM.

.Intermittent: 42 HP (31 kW)

Continuous: 36 HP (27 kW)


Natural Gas (corrected per SAEJ1995)

Fuel Specification.

.1050 BTU/FT3

Rated Power @ 3600 RPM.

.Intermittent: 74 HP (55 kW)

Continuous: 63 HP (47 kW)

Peak Torque @ 2600 RPM.

.Intermittent: 115 Ft. Lbs. (156 Nm)

Continuous: 98 Ft. Lbs. (133 Nm)

Power @ 1800 RPM.

.Intermittent: 39 HP (29 kW)

Continuous: 33 HP (25 kW)


Liquefied Petroleum Gas (corrected per sae J 1995)

Fuel Specification.

.HD-5

Rated Power @ 3600 RPM.

.Intermittent: 84 HP (62 kW)

Continuous: 72 HP (54 kW)

Peak Torque @ 1800 RPM.

.Intermittent: 133 Ft. Lbs. (180 Nm)

Continuous: 113 Ft. Lbs. (153 Nm)

Power @ 1800 RPM.

.Intermittent: 45 HP (34 kW)

Continuous: 38 HP (28 kW)

[RJ]

The engine that powered the Daul unit was a Ford LRG-425 industrial engine.

It has a continuous rating of 72 hp with LP (propane)

Here are the specs:

Gasoline (corrected per SAE J1995)

Fuel Specification.

.87 A.K.I.

Rated Power @ 3600 RPM ....

.Intermittent: 74 HP (55 kW)

Continuous: 63 HP (47 kW)

Peak Torque @ 1800 RPM.

.Intermittent: 123 Ft. Lbs. (167 Nm)

Continuous: 104 Ft. Lbs. (141 Nm)

Power @ 1800 RPM.

.Intermittent: 42 HP (31 kW)

Continuous: 36 HP (27 kW)


Natural Gas (corrected per SAEJ1995)

Fuel Specification.

.1050 BTU/FT3

Rated Power @ 3600 RPM.

.Intermittent: 74 HP (55 kW)

Continuous: 63 HP (47 kW)

Peak Torque @ 2600 RPM.

.Intermittent: 115 Ft. Lbs. (156 Nm)

Continuous: 98 Ft. Lbs. (133 Nm)

Power @ 1800 RPM.

.Intermittent: 39 HP (29 kW)

Continuous: 33 HP (25 kW)


Liquefied Petroleum Gas (corrected per sae J 1995)

Fuel Specification.

.HD-5

Rated Power @ 3600 RPM.

.Intermittent: 84 HP (62 kW)

Continuous: 72 HP (54 kW)

Peak Torque @ 1800 RPM.

.Intermittent: 133 Ft. Lbs. (180 Nm)

Continuous: 113 Ft. Lbs. (153 Nm)

Power @ 1800 RPM.

.Intermittent: 45 HP (34 kW)

Continuous: 38 HP (28 kW)

\
Did you ever run the engine with the heads on it? I'm  curious if it was indeed 1800 rpm, I've been doing some testing at at ~1250 rpm I'm getting 25 bolts no load, I put a small load on it and was at about 21 volts. Motor did slow down some. I started a thread in the PMG sub forum.