News:

we are back up and running again!

Main Menu

CHP Update

Started by Tom Reed, December 15, 2010, 03:38:11 PM

Previous topic - Next topic

Tom Reed

Having used the chp system for a few weeks I'm pleased with the results. The water is flowing through the hydronic loops in the basement and master bed room. The bed room is on the opposite side of the house from the wood stove, so it stays a bit cool back there and I tended to run the wood stove a bit harder to warm it up back there. Now with the chp running about 5 hours every other day, due to little sun, the back room stays about 70 f and the floor while not quite warm is very comfortable on the bare feet. Sweet!
Ashwamegh 6/1 - ST5 @ just over 4000 hrs
ChangChi NM195
Witte BD Generator

Tom

d34

Glad to hear its working for you. It will prolly be next winter before I get mine running. It is in the garage for emergency if needed.
GM90 6/1 ST5 (ready for emergency)
Changfa ZS1105GNM with 10kw gen head
S195 no gen head
1600 watts of solar panels are now here waiting for install
2635 watts of solar panels, Outback 3648 & 3048 Inverters, MX60, Mate
840Ah (20 hr rate) 48v battery bank & 660Ah (8 hr rate) 48v battery bank

mobile_bob

don't you just love it when a plan "actually" comes together!

good job!

bob g

AdeV

Great stuff Tom!

My CHP system is still but a distant dream.... I reckon I'm about 2 years behind some of you guys (at the rate I work, at least!) but it's nice to see all these systems really starting to come into their own.

Especially the Lister[oid] based ones. None of this noisy chaggggfgggagaargh nonsense  ;D
Cheers!
Ade.
--------------
Lister CS 6/1 with ST5
Lister JP4 looking for a purpose...
Looking for a Changfa in my life...