Changfa stub shaft

[Henry W]

It's a drawing in the Kubota EA300 service manual.

In the detail of flywheel section see if your three bolt holes match, or are close to the dimensions below:

B = 116 DIA. (4.57 DIA.)

The mounting flange on the R170 engine pulley would help you determine if it might possibly work.

Hi Henry, The recess in my flywheel where the pully bolts onto the flywheel is 89mm or3.500 in. Quite a bit smaller that the Kubota recess in the flywheel. Could it be made to work, I am not sure. I will look around for more Kubota shafts to see what else is available. I will look up some part numbers and show you what I come up with. And maybe get your opinion on if it will work.  I think playdiesel has another option that may work. Thanks Henry you are the guru to go to for information. Keith.

Keith, thanks for the compliment. Others here, including myself help wherever we can. We enjoy helping members with projects.

I'm glad playdiesel is in contact with you. He definitely has the equipment and knowledge to help you.

Henry