Micro CoGen.

Thanks guys for the replies, if that is the only function i will eliminate it ,is this a 120 volt circuit ?I replaced the voltage gauge, this gives me a good indication on the performance.I did notice that the voltage gauge needle bounces a bit with main breaker in on and off position must pick up some harmonics or magnetic field any explanation for this ? Thanks for your help   Ted

Hi  I have been reading the posts on the chanfa zs1115 question and have a question I hope you guys can help me with,I am fixing up a zs1115 with a 12 kw direct drive generator,I replaced the head gasket on the engine and are re doing the electrical connection box on the generator, replaced the old steel box for a 8x8x7 inch electrical box added a 1 x 50 amp receptacle 2 x 120 receptacle with each there own 15 amp mini breaker and reused the main breaker.it has a small on/off switch with a light bulb socket and i am not sure what the purpose for these are, omhed out the switch and seems faulty the light bulb and light bulb cover are gone.Any help on this would be great  thanks Ted

Hi the s 1115 i have is a xing dong the cylinder sleeve sticks out the block a bit,still 4 head gaskets available ,if you would like a picture then send me a pm with your e mail and i will send you a picture.

Hi to you all, just wanted to let any of you know that if you are in need of a s 1115 head gasket i have 4 available.     Ted