I used the calculator. I want to run a 5hp pump with a 2 hp motor. I'm not sure the belt will handle it, or if i need 2 belts. If i use a Idler pulley to increase contact angle, can I get away with one belt?
I'm looking at a 3.5" ish drive wheel and a 11" ish pump pulley. What is the load on the belt?
In the calculator: does HP refer to the motor or the load?
I'm looking at a 3.5" ish drive wheel and a 11" ish pump pulley. What is the load on the belt?
In the calculator: does HP refer to the motor or the load?