Print Page - Ginlong PMA for wind or hydro?

Title: Ginlong PMA for wind or hydro?
Post by: BruceM on March 18, 2010, 09:18:29 PM

The 1000w unit looks very interesting- high voltage 3 phase output at just 200 rpm.

http://www.ginlong.com/wind-turbine-pmg-pma-permanent-magnet-generator-alternator.htm

Title: Re: Ginlong PMA for wind or hydro?
Post by: Jedon on March 19, 2010, 03:29:22 PM

Hmm think it would work with this?

http://cgi.ebay.com/Pelton-Water-Wheel-Aluminum-Generator-Power-Projects_W0QQitemZ190376086097QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2c534c8a51#ht_500wt_1182

I suppose flow and head would be needed to know? Say 40gpm @ 80ft head.

Micro CoGen.

Alternators and Generators => PM generators => Topic started by: BruceM on March 18, 2010, 09:18:29 PM