Print Page - Bargain 200 oz-in servo with 0.13 sec transit time

Title: Bargain 200 oz-in servo with 0.13 sec transit time
Post by: BruceM on January 20, 2010, 05:15:48 PM

For a rack closer, or governor "nudger" or flat out electronic governor, this servo looks like a great deal. It's metal gear, coreless motor, high torque and speed. $34 incl. shiipping! Note the satisfaction guaranty, including return shipping. Impressive.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220481888243

Title: Re: Bargain 200 oz-in servo with 0.16 sec transit time
Post by: AdeV on January 20, 2010, 05:37:13 PM

Looks to be similar to this one, available in the UK: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220543651600

I'm assuming that "15 KG STALL TORQUE" is roughly the same as the 208 oz/in quoted in your link...

EDIT: It is the same, 15kg/cm is quoted in both listings :)

Also worth looking around on eBay for a better deal; e.g. here's a 4-pack of the same for less than 40 quid delivered (within the UK): http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=370213902366

Also available from Hong Kong (£27.50 delivered to the UK..... if you want to take the risk)

I'm not sure if the aftersales is as good as the one you linked to though, Bruce...

Title: Re: Bargain 200 oz-in servo with 0.13 sec transit time
Post by: BruceM on January 20, 2010, 10:35:50 PM

The JR servo is also much slower- 0.2 sec for 60 degree transit. But that's a good deal on that servo.

Micro CoGen.

Electrical/Electronic equipment => Automation, Controllers and Regulators => Topic started by: BruceM on January 20, 2010, 05:15:48 PM