Micro CoGen.

Prime movers, diesel and gas engines => Changfa/Redstone/Chinese diesels => Topic started by: keith71 on December 11, 2021, 01:24:03 PM

Title: Changa clone?? on ebay
Post by: keith71 on December 11, 2021, 01:24:03 PM
Except for being air cooled insread of a changfa hopper cooled engine. Does not look like much difference. Again zero emissions. Sure is strange on what can enter this country and what cannot. Also comes with the same useless pulley instead of a stub shaft.                                                                     
                                                                                                                                                                                         
         https://www.ebay.com/itm/133948570653?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D235868%26meid%3D9115095c59844c25840ccdbab34cf618      

Keith71
Title: Re: Changa clone?? on ebay
Post by: Henry W on December 11, 2021, 04:24:27 PM
That 175FA is quite different from an R175. The R175 has an oil pump and that feeds the connecting rod big end and quite possibly the rocker arm shaft. The R175 also has an oil filter. I've never seen a 175FA up close so I dont know anything about the quality.
Title: Re: Changa clone?? on ebay
Post by: Henry W on December 11, 2021, 05:51:41 PM
Quote from: Henry W on December 11, 2021, 04:24:27 PM
That 175FA is quite different from an R175. The R175 has an oil pump and that feeds the connecting rod big end and quite possibly the rocker arm shaft. The R175 also has an oil filter. I've never seen a 175FA up close so I dont know anything about the quality.

Keith71
Check your messages.
Title: Re: Changa clone?? on ebay
Post by: veggie on December 23, 2021, 09:07:56 AM

The 175FA is an air cooled engine. The R175 is water cooled.
175FA is all cast iron and built quite well. I have the 165FA version.
Being air cooled they are a bit noisy, but they are built like a tank and should give good life.
They come in two configurations. Horizontal cylinder and 45 Deg angle cylinder.(Mine is the 45 degree) But the guts are the same.
Here is what they sound like....
https://www.youtube.com/watch?v=VYVzJEbizWA (https://www.youtube.com/watch?v=VYVzJEbizWA)
Title: Re: Changa clone?? on ebay
Post by: veggie on December 23, 2021, 09:11:51 AM

... and here is a vid of the horizontal air cooler version.
https://www.youtube.com/watch?v=WlOcOZ2Hglg (https://www.youtube.com/watch?v=WlOcOZ2Hglg)
Title: Re: Changa clone?? on ebay
Post by: Henry W on December 23, 2021, 07:37:19 PM
Quote from: veggie on December 23, 2021, 09:07:56 AM

The 175FA is an air cooled engine. The R175 is water cooled.
175FA is all cast iron and built quite well. I have the 165FA version.
Being air cooled they are a bit noisy, but they are built like a tank and should give good life.
They come in two configurations. Horizontal cylinder and 45 Deg angle cylinder.(Mine is the 45 degree) But the guts are the same.
Here is what they sound like....
https://www.youtube.com/watch?v=VYVzJEbizWA (https://www.youtube.com/watch?v=VYVzJEbizWA)



I think that is a great backup generator.  Simple and compact.

Nice setup veggie.