OK problem solved, BUT I don't know why.
The generator was wired correctly. I checked my leads to my disconnect breaker. Looked for some sort of short and could not find any thing. I have made sure that all connection IE L1, L2, L0 and the wires that are tied together but not connected to any outside wire are good a separated. It is possible/probable that something was shorting before I unwound all my electrical tape to check the leads. I will get some of that rubber tape when I go to town tomorrow and really insulate the leads.
The Lima Mac (280 frame) does not have a terminal block in the dog house. It does not have much of a dog house.
Right now the wires are hanging outside the dog house.
Brucem.
Thanks for your help on this
Regards
The generator was wired correctly. I checked my leads to my disconnect breaker. Looked for some sort of short and could not find any thing. I have made sure that all connection IE L1, L2, L0 and the wires that are tied together but not connected to any outside wire are good a separated. It is possible/probable that something was shorting before I unwound all my electrical tape to check the leads. I will get some of that rubber tape when I go to town tomorrow and really insulate the leads.
The Lima Mac (280 frame) does not have a terminal block in the dog house. It does not have much of a dog house.
Right now the wires are hanging outside the dog house.
Brucem.
Thanks for your help on this
Regards